Comments for Solid DNA blog

Comment on Conditional formula by solidadn

solidadn — Sat, 09 Feb 2013 03:23:33 +0000

Note: This article was written under ST2, the comment made by Steve and the test I made were made under ST5. Make sure you visit

http://www.soliddna.com/SEcommunity/topic/301-comment-on-conditional-formula-by-solidadn/

To have the latest information and update, Thank you

Comment on Conditional formula by solidadn

solidadn — Fri, 08 Feb 2013 00:41:37 +0000

Hi Steve

I think i found the correction to apply to your formula,

Looks like the editor for the comment does not render the text dorrectly.

Please see the reply on the copmmunity http://www.soliddna.com/SEcommunity/topic/301-comment-on-conditional-formula-by-solidadn/

Assuming that length is 200, In your formula when we read it, it says

• If Length equal or is larger than 50 report -1…( Length >=50)
• If length is smaller than 300 report -1…( Length =50)and( Length =50)and( Length <300))))

Your formula based on step 2 should have start with

• and = to set the higher limits

In the case you have only two limits

• To set the higher limit

Hope this one is the good one

Comment on Conditional formula by solidadn

solidadn — Thu, 07 Feb 2013 00:49:59 +0000

Steve let me check this as I can reproduce your situation

Comment on Conditional formula by Steve

Steve — Wed, 06 Feb 2013 08:23:36 +0000

Hi Thanks for the reply, if I use ABS(182.7) then this will return 182.7 as it dose in your video but if you then apply the formula as in the blog which I replied to, ABS((182.7*( Length >=50)and( Length <300))) it returns 183.0.

Oh, and it this formula I find really useful.

Comment on Conditional formula by solidadn

solidadn — Wed, 06 Feb 2013 01:57:31 +0000

Steve,

You may have to check the round-up settings inside SE, on my system, the ABS does not round the value. Here a quick video

Comment on Conditional formula by Steve

Steve — Tue, 05 Feb 2013 10:00:21 +0000

I find this really useful, BUT if I use for example 281.7 ABS should return 281.7 but solid edge using this formula is rounding it to 282, ABS should return the absolute number. Why is it rounding it of.

Comment on CAD Business model by solidadn

solidadn — Wed, 10 Oct 2012 23:53:00 +0000

Hi Kevin

Your right this component of the portfolio is not license. Could this change in the future ??? could this be embed in parasolid???

I wonder up to what point a CAM partner could link to synchronous using the API???

Comment on CAD Business model by Kevin De Smet

Kevin De Smet — Wed, 10 Oct 2012 09:29:52 +0000

Siemens PLM Components are fairly remarkably open, but they do hold certain assets back for competitive advantage, just look at Synchronous Technology.

Comment on CAD Business model by CAD Business model « Solid DNA blog | Software Engineering Software

CAD Business model « Solid DNA blog | Software Engineering Software — Mon, 08 Oct 2012 23:48:07 +0000

[...] Link: CAD Business model « Solid DNA blog [...]

Comment on Solid Edge Insight XT coming this summer by PDM, Collaboration and Google Apps « Daily PLM Think Tank Blog

PDM, Collaboration and Google Apps « Daily PLM Think Tank Blog — Wed, 06 Jun 2012 22:16:26 +0000

[...] very positive. I’m looking forward to the Siemens PLM announcement of a new version of SolidEdge Insight XT and the possibility of Insight XT to work with SharePoint on the [...]